Argon Gas Bottles & Regulators

Argon Gas Bottle Valves There are many different types of regulators out there with many different suppliers. So there can be confusion about the cylinders, the valves, and what connections and regulators are required. We hope the information below helps reduce the confusion. All Australian approved Argon cylinders have a Type 10 valve and all regulators¬†purchased in Australia should also have a type 10 valve connection. The only difference, for Industrial high-pressure cylinders, is that around 10-12 years ago the valve on the top of the bottles was changed from being vertical (i.e. the open valve was facing the sky), to being horizontal (pointing to the side). This change was made for safety reasons, specifically preventing moisture getting inside the cylinders. So as long as your cylinder is Australian approved as all Rentfreegas and Speedgas¬†cylinders are, then you are ok. Regulators Regulators are used to control the flow of gas from the Argon cylinder to your job or application. The argon regulator allows you to work at a safe, and lower pressure, by reducing the high pressure inside the cylinder to the desired working pressure for welding. Below is an example of one of our regulators that includes a ball valve flow metre, allowing you to set the gas flow to anywhere between 0-25L per minute.             Some of the other gases and there valve outlets are: Gas Valve Type Argon Type 10 Helium Type 10 Oxygen Type 10 Acetylene Type 20 CO2 Type 30 Nitrogen Type 50 Air Type 60 Note: High-pressure Nitrogen cylinders have a Type 51 outlet connection. Check with your gas supplier about what valve type your cylinder comes with.